Are SSS ID and UMID the same?

Are SSS ID and UMID the same?

An SSS ID is a previous generation of the UMID card. The latter has superior security measures to the former. This card can be issued before an SSS ID. When it is, the old identification number will not work any more. You need to get a new one.

An SSS ID can be used when applying for a government job or some other official document. It's preferable to use your new UMID card instead. If you don't have one yet, you can apply for a UMID card online here: http://umid.gov.mt.

The SSS ID card contains your photo, the issue date, and information about your employer. It can be used as a form of identification when accessing government offices or facilities. The card will not replace your passport, but it can be used in place of it if necessary.

Since the introduction of the UMID card, the SSS has ceased to exist. All employment related documents now require its use.

If you still have an SSS ID card, it's time to get it replaced. Contact the SSS to find out how to do that.

In conclusion, an SSS ID is older than but similar to a UMID card.

How can I check my SSS ID?

Log in to your account on the SSS's official website (Member Login). Hover your mouse over E-Services and then select Inquiry. Select SSS ID Card after checking Member Info. The Transaction/Card Status, which specifies the dates of your SSS UMID Card production, packing, and shipping, may be seen there. This information is also available at SSS offices.

If you cannot access your Account via the Website, send an e-mail to [email protected] In your message, include your SSS User ID.

An SSS officer will reply to you with more details about your card.

What are the valid IDs for SSS?

Primary Identification Cards and Documents

  • Social Security (SS) card.
  • Unified Multi-Purpose ID (UMID) card.
  • Passport.
  • Professional Regulation Commission (PRC) card.
  • Seaman’s Book (Seafarer’s Identification & Record Book)
  • Alien Certificate of Registration.

Where can I use my UMID card?

The Unified Multi-Purpose Identity Card (UMID) is a four-in-one identification card that Filipinos may use to deal with government agencies such as the Social Security System (SSS), Government Service Insurance System (GSIS), PhilHealth, and Pag-IBIG Fund. The UMID can be used as a form of ID for banking, shopping, traveling, and more.

The SSS will issue your UMID card. You can also apply online for a UMID card. After you are registered, go to any SSS office or branch data center and ask for an application form. Make sure to bring valid documents to prove your identity and age. You can choose to have your UMID card sent to an address of your choice. If you have not yet registered with the SSS, visit any SSS office or branch data center and fill out an application form. They will need your name, date of birth, and address for verification purposes.

Your UMID card contains the following information:

• Front side - Identification section: This section includes the photo of the cardholder and other necessary details for identification purposes. • Back side - Administrative section: This section includes the address of the bearer as well as the issuing agency's phone number for complaints and inquiries.

Both sides of the card are divided into sections for easy handling.

Is SSID the same as an IP address?

SSID is an abbreviation for "service set identifier," and it is used to identify any specific wireless network. Consider it the IP address of a wireless network. Like IP addresses, they can be unique or shared among multiple networks.

What does an SSID tell you?

SSID is an abbreviation for "Service Set Identifier." A "service set" is a collection of wireless networking devices that have the same specifications as defined by the IEEE 802.11 wireless networking standard. In other words, the SSID is the identifier (name) that tells you which service set (or network) to join. It can be any string of characters between 1 and 32 characters in length.

The SSID is used by clients to identify which network to connect to. This information is sent out with the beacon frame from a wireless router. Clients will scan for beacons from different networks until they find one they like. Then they send out probe requests to see if there are any available networks within range. If so, they connect to that network. Otherwise, they keep searching.

Most people think of Wi-Fi as having a single network called "Wi-Fi," but in reality, there can be many more networks than just these two. Each time a client connects to a new network, the SSID of this network is sent to other clients so they can connect too. Only clients with the exact same SSID as the first client will connect to this second network. The others will stay on their original network.

If you don't want everyone on your network to be able to access the internet, then you should change the SSID of your network.

What is the access point SSID?

A Service Set Identification (SSID) is a unique identifier assigned to the Access Point (AP) and wireless client that allows them to communicate with one another. It is usually displayed as a string of characters in a graphical user interface (GUI), but it can also be used as an argument for the iwconfig command.

The SSID is important because it is what identifies your network to other devices. If you wanted to share files with someone else, you would need to give their devices something called a "network key", which could be done by either emailing it to them or having them log on to your website using their Wi-Fi connection information. The email address or web address listed under that network's settings will only work if they have an account with your company or person.

This is how you would set the SSID for a new network: Open a Windows PowerShell window as an administrator. Type in iwconfig to view all current wireless networks along with some other useful commands. Right click on any empty space within the GUI and select New Service - this creates a new SSID for your network. Enter a name for your network into the Name field and click OK. You are now ready to connect computers to this network.

About Article Author

James Grimaldi

James Grimaldi is a security expert who enjoys teaching people how to survive dangerous situations. He has survived some of the most life-threatening accidents and knows what it's like to be in danger. James loves sharing his knowledge with others so they can stay safe, too!

Disclaimer

DataHack4fi.org is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

Related posts